steering rack removal

Renault & Alpine General Discussion

Moderators: eastlmark, phildini, BIG_MVS, Alpineandy, Test Moderator

no avatar
User

Darcy57

Rank

Non Member

Posts

55

Joined

Tue Jun 25, 2019 6:43 am


Has thanked: 1 time
Been thanked: 0 time

steering rack removal

Postby Darcy57 » Sat Aug 10, 2019 3:53 pm

help!! after striping out front have found i need new rack. have taken out tank and removed bolts passenger side but can find no accsess to drivers side bolt i cant even see it even on a 2 post lift . do i have to remove brake servo or cut a hole above it to get to it??? any help would be much appriciated. brian.
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Re: steering rack removal

Postby clee » Sun Aug 11, 2019 7:55 am

Not sure what bolts you have removed but it's all accessible from top and bot without tank removal etc. You need to take the covers out from under the battery tray/heater blower. You can then see the two main bolts for rack brackets/clamps 18mm heads. Underside M8 bolts and then the clamps are off. Another M10 nut and bolt holds the brackets on . Then take it all out through the drivers wheelarch.
no avatar
User

Darcy57

Rank

Non Member

Posts

55

Joined

Tue Jun 25, 2019 6:43 am


Has thanked: 1 time
Been thanked: 0 time

Re: steering rack removal

Postby Darcy57 » Sun Aug 11, 2019 10:41 am

many thanks clee think my brain went into melt down! can see what you mean know still can finish of waxoil now tanks out. brian.


  • Advertisement

Who is online

Users browsing this forum: No registered users and 32 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France