engine /gearbox removal

Renault & Alpine General Discussion

Moderators: eastlmark, phildini, BIG_MVS, Alpineandy, Test Moderator

no avatar
User

Darcy57

Rank

Non Member

Posts

55

Joined

Tue Jun 25, 2019 6:43 am


Has thanked: 1 time
Been thanked: 0 time

engine /gearbox removal

Postby Darcy57 » Mon Sep 02, 2019 5:16 pm

well the big day has come! front end refurbed and back on. have got the car on 2 post lift and have enngine hoist have striped out allback suspension . can see lifting points on engine doi have to surport gearbox aswell and do i drop down on subframe and seperate when on trolly iv made up. would appricate advice .many thanks brian.
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7462

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Re: engine /gearbox removal

Postby stephendell » Mon Sep 02, 2019 11:12 pm

Lower the car on the lift and Support the complete subframe with blocks or stands on the trolley. Undo the 6 bolts and then raise the car leaving the complete subframe, engine and gearbox assembly on the trolley.

Obviously undo gear linkage, reverse cable, brake lines electrical connections etc first
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
no avatar
User

Darcy57

Rank

Non Member

Posts

55

Joined

Tue Jun 25, 2019 6:43 am


Has thanked: 1 time
Been thanked: 0 time

Re: engine /gearbox removal

Postby Darcy57 » Tue Sep 03, 2019 6:07 am

thanks stephen that makes sense. many thanks brian.


  • Advertisement

Who is online

Users browsing this forum: No registered users and 54 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France