What is the best way to drain the coolant?

A place to showcase your pride and joy

Moderators: eastlmark, BIG_MVS, Test Moderator

no avatar
User

dallarax19

Rank

Non Member

Posts

99

Joined

Tue Oct 30, 2012 1:44 am


Has thanked: 0 time
Been thanked: 1 time

What is the best way to drain the coolant?

Postby dallarax19 » Tue Jul 02, 2013 4:38 pm

I am finally getting around to removing the PRV from my A310. I am faced with draining the dreaded coolant. Is the drain plug on the right side of the engine (right side for an Alpine that is)? I dont want to create a big ole mess so I am looking for recommendations. I would appreciate the help.
User avatar
User

blueg33

Rank

Non Member

Posts

490

Joined

Wed May 30, 2012 12:14 pm

Location

United Kingdom


Has thanked: 0 time
Been thanked: 0 time

Postby blueg33 » Tue Jul 02, 2013 4:56 pm

This is no help

But on my GTA I drained all of the coolant in about 60 seconds onto the A435 by having a knackered radiator :)
Ginetta G33, TVR Tuscan, Audi A6 Quattro, Subaru Outback. Blue GTA Turbo

"If everything feels under control, you are not going fast enough" - Mario Andretti
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Tue Jul 02, 2013 5:12 pm

drain plugs on both sides .
Image

11 o'clock to filter this side and also on the other .10mm square drive .
no avatar
User

dallarax19

Rank

Non Member

Posts

99

Joined

Tue Oct 30, 2012 1:44 am


Has thanked: 0 time
Been thanked: 1 time

Thanks! I appreciate the comments.

Postby dallarax19 » Tue Jul 02, 2013 5:41 pm

Got a chuckle out of this one

"But on my GTA I drained all of the coolant in about 60 seconds onto the A435 by having a knackered radiator"
I assume "A435" is a freeway and "knackered" means it has failed in a most inconvenient way. I am from the US so not a common term here.

Thanks for the location for the drain plug, I thought it might be the one in the 5 O clock position. In either case the coolant will run, trickle, spatter down the side no? I will have to come up with some overly complicated means of capturing the fluid in an attempt to keep if from running all over the ground. :D

By the way is that a Felpro Prematorque gasket? If so how do you like them?
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Tue Jul 02, 2013 5:55 pm

Glaser from Meca ,certainly do the job on the turbo's running big BOOOOOOOST :lol:
User avatar
User

JohnC

Rank

Non Member

Posts

2120

Joined

Sun Dec 02, 2007 6:19 pm

Location

Jersey C.I.


Has thanked: 15 times
Been thanked: 83 times

Postby JohnC » Tue Jul 02, 2013 6:32 pm

It goes without saying however, remove the coolant filler cap, or you will be there for ages while it splutters out.
If you want to drain as much coolant as possible from the system before eventually refilling with Type D Renault coolant (recomended) jack the rear of the car up about 6ins or so, then remove the rad switch, which on the GTA at least, is the lowest point to drain without removing the rad. That should allow most, but not all, the coolant to be removed from the system.
Hope this helps. :wink:
1990 GTA Atmo, 2003 Jaguar X type 2.5SE Auto, 2018 Kia Picanto GT-Line-S 1.25
User avatar
User

blueg33

Rank

Non Member

Posts

490

Joined

Wed May 30, 2012 12:14 pm

Location

United Kingdom


Has thanked: 0 time
Been thanked: 0 time

Re: Thanks! I appreciate the comments.

Postby blueg33 » Tue Jul 02, 2013 6:50 pm

dallarax19 wrote:Got a chuckle out of this one

"But on my GTA I drained all of the coolant in about 60 seconds onto the A435 by having a knackered radiator"
I assume "A435" is a freeway and "knackered" means it has failed in a most inconvenient way. I am from the US so not a common term here.

?


The A435 is a main road, but you would probably describe it as a narrow rural track :) 1 lane in each direction.

Knackered = old, broken, worn out, useless etc. A bit like me.

I was going to used FURBAR, I assume you use that term in the US
Ginetta G33, TVR Tuscan, Audi A6 Quattro, Subaru Outback. Blue GTA Turbo

"If everything feels under control, you are not going fast enough" - Mario Andretti
User avatar
User

si21

Rank

Non Member

Posts

2094

Joined

Mon May 09, 2005 8:24 pm

Location

S.E London


Has thanked: 3 times
Been thanked: 2 times

Postby si21 » Wed Jul 03, 2013 2:10 pm

blueg33 wrote:This is no help

But on my GTA I drained all of the coolant in about 60 seconds onto the A435 by having a knackered radiator :)


beat me to it .....i was gonna suggest driving it :lol: worked for me for about 3 years . SORRY ....ITS THE IN THE ALPINE FACE OF ADVERSITY COMING OUT :lol: head gaskets solved the issue in the end.

I am sure someone will have given you some sound advice already.

Si21
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Sun Jul 07, 2013 1:20 pm

Glaser from Meca, certainly do the job on the turbo's running big BOOOOOOOST :lol:


Better qualify that a little, not at 20 psi they're not :wink: :lol: JonV's post water coolant dump method on M40 as noted above by a few, definitely the fastest approach to a complete flush out! :evil:

Image

Image

Gaskets changed for something a little more suitable for JonV ragging… Lol...
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Sun Jul 07, 2013 1:24 pm

ahh but see now which would you rather replace ,the gaskets or the heads :lol: :wink:
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Sun Jul 07, 2013 1:26 pm

.
:lol: definitely the fuseable link 8)
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

darrenbiggs

Rank

Non Member

Posts

1499

Joined

Thu Apr 29, 2004 1:03 pm

Location

Horley - Nr Gatwick


Has thanked: 15 times
Been thanked: 39 times

Postby darrenbiggs » Tue Aug 27, 2013 5:39 pm

Just bought 10L of type-d for changing the entire cooling system out. I'm going to replace the two chubby hoses that link to the water pump as they're a bit old and swollen.

Question now is should I change the 'stat just for good measure along with the header tank.

Interesting looking at the head-gasket pics that Lee posted how much metal there is between the bores.

I know BMW admitted they'd taken the old E46 M3 unit as far as they could go, but look at the differences.

Image

Not mine I hasten to add!

Wet liners on the PRV probably mean you need more meat in the block, but it's interesting how sturdy the PRV looks in comparison.
I'm just here for the gasoline.
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Tue Aug 27, 2013 5:52 pm

Swings and roundabouts ....I think I'd prefer the solid to the wet floating .....but doesn't look to clever that .

Do me a favour and flush the system through and let us know what it's like please .Remove the stat and flush via the rad hoses .Just curious to see how mush shite or not come out as it's been rebuilt and sat a fair few months now .
User avatar
User

darrenbiggs

Rank

Non Member

Posts

1499

Joined

Thu Apr 29, 2004 1:03 pm

Location

Horley - Nr Gatwick


Has thanked: 15 times
Been thanked: 39 times

Postby darrenbiggs » Tue Aug 27, 2013 6:39 pm

Well if the coolant bottle is anything to go by then I'd say not much.

(I 'decanted' a bit into a glass and all in all looked pretty clean)
I'm just here for the gasoline.


  • Advertisement

Who is online

Users browsing this forum: No registered users and 39 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France