A310 project

A place to showcase your pride and joy

Moderators: eastlmark, BIG_MVS, Test Moderator

no avatar
User

Trevor Skedge

Rank

Non Member

Posts

576

Joined

Sun Aug 23, 2009 8:39 pm


Has thanked: 0 time
Been thanked: 3 times

A310 project

Postby Trevor Skedge » Sun Jun 16, 2019 12:46 pm

Will keep you up to date with progress on this car but plan is to get it back on the road and useable In the next couple of weeks. Was running lean which I put down to lack of use and as I run fuel through it, it’s getting better with every start. Got all the lights and windows working now, just need to locate the flasher relay as hazards work but not the indicators. Couple of bits I may need JL Engineering to sort out but been a while since I’ve had a decent project and enjoying its simplicity so far.
You do not have the required permissions to view the files attached to this post.
no avatar
User

Pjr

Rank

Non Member

Posts

70

Joined

Thu Mar 21, 2019 7:28 pm

Location

Gloucestershire


Has thanked: 2 times
Been thanked: 0 time

Re: A310 project

Postby Pjr » Sun Jun 16, 2019 7:15 pm

Trevor,

She looks lovely. Im reviving a GTA and have has indicator issues. What follows may or may not be of any use as I have no idea if the GTAA and 310 are similar in this respect.......

In the GTA, there is a fuse box under the steering wheel with a few relays above. If you unscrew that fuse/relay compartment, there’s is a hidden row of relays inc one for hazards and one for indicators.
When I tried to pull out the relay, the innards came out leaving the case fixed to the car.
Inside were two little relays and I cleaned the contacts with electrical spray and emery paper and they now work.

So basically, the Alpine MO may be to hide the relays behind others in compartments that you have to unscrew!

As I say, the 310 may be entirely different.....

Good luck,

Phil
no avatar
User

Trevor Skedge

Rank

Non Member

Posts

576

Joined

Sun Aug 23, 2009 8:39 pm


Has thanked: 0 time
Been thanked: 3 times

Re: A310 project

Postby Trevor Skedge » Sun Jun 16, 2019 7:39 pm

Thanks for the pointers. I found the hazard relay as that's easy to locate as it makes a noise because it works :-). I'll have another search tomorrow.

Trevor.
User avatar
User

johnb

Rank

Club Member

Club Member
Posts

857

Joined

Wed Sep 13, 2006 6:57 pm

Location

Cheshire


Has thanked: 13 times
Been thanked: 25 times

Re: A310 project

Postby johnb » Sun Jun 16, 2019 8:13 pm

I've answered your other post about the indicator relay.
The main group of relays are behind the front boot liner, just above the front nearside wheel. The relay for the wiper intermittent operation is behind the washer bottle. I only found out because I was basically taking the whole car apart several years ago. As you can see form the front and back photos, you have to remove the washer bottle support to find it on the back.
You do not have the required permissions to view the files attached to this post.
1970 A110V85 and 1980 A310V6.
no avatar
User

Pjr

Rank

Non Member

Posts

70

Joined

Thu Mar 21, 2019 7:28 pm

Location

Gloucestershire


Has thanked: 2 times
Been thanked: 0 time

Re: A310 project

Postby Pjr » Sun Jun 16, 2019 8:44 pm

I just love the way these cars are so quirky! I thought Lotus were eccentric......
no avatar
User

Trevor Skedge

Rank

Non Member

Posts

576

Joined

Sun Aug 23, 2009 8:39 pm


Has thanked: 0 time
Been thanked: 3 times

Re: A310 project

Postby Trevor Skedge » Sun Jun 16, 2019 9:15 pm

Thanks again John.

Pjr, I’m a Lotus fan too.

Trevor.
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7462

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Re: A310 project

Postby stephendell » Sun Jun 16, 2019 9:26 pm

Really pleased to see some progress after 18 months or so in hibernation. Hope to see you out and about at a show soon.

Here’s the car on its way to Trevor

BE4E297C-FC4F-4301-A8C3-C342E6DA1849.jpeg


Quite a special and unusual car and I’m sure Trevor will give more info later
You do not have the required permissions to view the files attached to this post.
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
no avatar
User

Trevor Skedge

Rank

Non Member

Posts

576

Joined

Sun Aug 23, 2009 8:39 pm


Has thanked: 0 time
Been thanked: 3 times

Re: A310 project

Postby Trevor Skedge » Tue Jun 18, 2019 8:21 pm

Indicators now working as a replacement relay was sourced.
Door handles were not present so a temporary solution fitted.
You do not have the required permissions to view the files attached to this post.
User avatar
User

BIG_MVS

Rank

Club Member

Club Member
Posts

5097

Joined

Wed Jun 30, 2004 9:12 am

Location

Sandbach


Has thanked: 38 times
Been thanked: 72 times

Re: A310 project

Postby BIG_MVS » Wed Jun 19, 2019 3:09 pm

Trevor Skedge wrote:
Pjr, I’m a Lotus fan too.

Trevor.


And a Delorean one....?
1994 A610 - Montana Red (For Sale)
no avatar
User

Trevor Skedge

Rank

Non Member

Posts

576

Joined

Sun Aug 23, 2009 8:39 pm


Has thanked: 0 time
Been thanked: 3 times

Re: A310 project

Postby Trevor Skedge » Wed Jun 19, 2019 7:43 pm

Love Delorean too but they don’t drive very well although do have a “character” of their own. Love their looks.

Trevor.
no avatar
User

Trevor Skedge

Rank

Non Member

Posts

576

Joined

Sun Aug 23, 2009 8:39 pm


Has thanked: 0 time
Been thanked: 3 times

Re: A310 project

Postby Trevor Skedge » Wed Jun 26, 2019 8:26 pm

New manifolds, gaskets, studs, heater valve ordered and should be here this week, I’ll post up pics when they arrive. I’ve got a Devil exhaust from Mr Dell that I’ll see if I can use as think it will suit but have few clues as to how it’s going to fit. V5 also arrived today so straight down the post office to get that changed to Historic status and hope that’s back with me soon.

Trevor.
no avatar
User

Trevor Skedge

Rank

Non Member

Posts

576

Joined

Sun Aug 23, 2009 8:39 pm


Has thanked: 0 time
Been thanked: 3 times

Re: A310 project

Postby Trevor Skedge » Sun Jun 30, 2019 12:24 pm

Manifolds etc arrived so time to start stripping and as always one thing leads to another. Decided to take all the heat shield off and now have to decide whether to replace or have a fabricator repair where needed then have them blasted and powder coated. Some of the extra exhaust studs have been fitted and I need to chase the threads in the others before fitting them. Only one broke but it’s at the front so probably won’t tackle that with the engine in and a visit to JL Engineering at some point will see the engine out and some work in the gearbox and engine seals along with the stud. Got Devil exhaust off SD but not an simple fit unless I’m missing something so will either modify with new brackets or buy Simon Auto competition silencer which appeals but may be a little noisy?
You do not have the required permissions to view the files attached to this post.
no avatar
User

Trevor Skedge

Rank

Non Member

Posts

576

Joined

Sun Aug 23, 2009 8:39 pm


Has thanked: 0 time
Been thanked: 3 times

Re: A310 project

Postby Trevor Skedge » Sun Jun 30, 2019 12:52 pm

A few pics

Trevor.
You do not have the required permissions to view the files attached to this post.
no avatar
User

Trevor Skedge

Rank

Non Member

Posts

576

Joined

Sun Aug 23, 2009 8:39 pm


Has thanked: 0 time
Been thanked: 3 times

Re: A310 project

Postby Trevor Skedge » Sun Jun 30, 2019 12:54 pm

Couple more
You do not have the required permissions to view the files attached to this post.
User avatar
User

darrenbiggs

Rank

Non Member

Posts

1499

Joined

Thu Apr 29, 2004 1:03 pm

Location

Horley - Nr Gatwick


Has thanked: 15 times
Been thanked: 39 times

Re: A310 project

Postby darrenbiggs » Sun Jun 30, 2019 2:26 pm

Is that injected Trevor?
I'm just here for the gasoline.
Next


  • Advertisement

Who is online

Users browsing this forum: No registered users and 14 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France